Icon Lift 3rd Gen 4runner

These springs sat 1 higher than any other 3rd gen 4runner. If you have a fully stock 4runner, you can run the 3″ springs for a full 3″ lift in the rear.

Official 3rd gen 4Runners on 35's Pic Thread Page 31

Looking for good on road performance while leaning towards a suspension character of say a mojave/raptor/zr2.

Icon lift 3rd gen 4runner. If you plan to have a constant weight or want a higher lift in the rear then you can choose from the icon 2 or 3 coil spring. I own a 3rd gen 4runner and have 58610 on the front and 57800p on the rear. If your 4runner is equipped with kdss, then you are limited to only a 1 lift in the rear due to the rear sway bar.

Posted by 6 minutes ago. Icon vs king for a 3rd gen. Toytec bilstein 5100 3 lift installed on 2007 4runner.

$1800 cad or $1350 usd. I am now a self proclaimed expert at changing out front coilovers. Discussion in '3rd gen tacoma parts marketplace (2016+)' started by tnel12, jul 10,.

Looking to lift my 4runner about 1 to 2 inches. They can be ordered online or at a toyota dealer. Well i pulled the trigger on the stage 2 lift.

This kit can be configured with: 1.5 inch lift option 2: The job was actually pretty easy where the front took me about 4 hours to complete and the rear took about 3 hours to complete.

The largest 4runner community in the world. If you want a small lift or have worn out springs, a good option might be to change out your springs for springs from the 1999 4runner highlander edition. We have put together the ultimate economical lift kit for your 3rd gen 4runner.

If you're looking for an inexpensive suspension lift, you can do bilstein 5100's all around for about. King coilovers king rear shocks spc uca spc rear trail arms icon 52700 rear springs icon panhard bar scs ray10’s rci sliders rci full skids. Icon engineers have assessed the 3rd gen 4runner front to back and developed components that work together to extract maximum performance out of the vehicle.

Complete lift kits by icon, arb, ome, radflo, revtek, king. Icon overland series 3″ lift rear coil springs. This system features upper control arms with icon’s patented delta joint.

Icon engineers have assessed the 3rd gen 4runner front to back and developed components that work together to extract maximum performance out of the vehicle. 3” ride height when unloaded and 2” ride height if weight is added (drawers, fridge, bumper, etc.). King coilovers king rear shocks spc uca spc rear trail arms icon 52700 rear springs icon panhard bar scs ray10’s.

Icon vs king for a 3rd gen. Keep in mind, this was by myself, while taking numerous pictures and meticulous measurements of. The eibach 1 lift is the most popular as it will level out the 4runner stance.

4" 4.5" Lift on 5th Gen 4Runner Ekstrom Strut Shims